Milling machines
Portal milling machine TOS FREP-D 20x40A
y.o.c. /retrofit: 1986/2003
r.s. : Siemens
Clamping table
Dimensions of the table: 2 000 x 4 000 mm
Total length of mounted tables: 9 000 mm
Clamping surface of mounted tables: 8 500 mm
Load per 1 m table length: 5 000 kg
Working feed of the table: 15 – 3 000 mm/min.
Rapid feed: 9 000 mm/min.
Passage between columns: 2 750 mm
Height adjustment of the crossbar: 2 295 mm
Crossbar feed: 750 mm/min.
VFS 160 vertical headstock
Clamping taper : ISO 60
Headstock power: 50 kW
Speed range: 15 – 710 rpm.
Working feed: 10 – 2 000 mm/min.
Rapid feed: 2 000 mm/min.
Horizontal headstock VFS 160
Clamping taper : ISO 60
Headstock motor power: 50 kW
Motor speed range: 15 – 710 rpm.
Working feed: 5-1000 mm/min.
Rapid feed: 1,000 mm/min.
Dimensions of the machine: (L x W x H) : 20,720 mm x 8,500 mm x 7,150 mm
Accessories : Additional spindle heads NVS head (extension attachment)
Clamping taper : ISO 60
Max head spindle speed: 710 rpm.
Max. power from 60 rpm. : 40kW
Max. torque: 6500 Nm
HFUS head (universal milling head)
Clamping taper : ISO 60
Max speeds of the spindle : 15 – 710 rpm.
Max. transmitted power from 80 rpm: 22 kW
Max. torque: 2700 Nm
Working radius horizontal/vertical axis: 360°
Adjustment of quill: 50mm
HFOS head (double-sided milling head - rectangular)
Clamping taper : ISO 60
Head spindle speed: 15 – 710 rpm.
Max. transmitted power from 60 rpm: 40 kW
Max. torque: 6500 Nm.
Working radius in the vertical axis: 90°
Portlal milling machine FREP-D 20x40A
Portal milling machine TOS FRPD 16x30
y.o.c. /retrofited : 1970 / 2007
Clamping table
Dimensions of the one table: 1,600 x 3,000 mm
Total length of mounted tables: 7,000 mm
Clamping surface of mounted tables: 6,500 mm
Height of the work table from the base: 900 mm
Travel of partial table: 3,000 mm / (connected tables 6,500 mm)
Working feed of the table: 20 – 2,000 mm/min.
Rapid feed: 4,000 mm/min.
Passage between columns: 2,020 mm
Height adjustment of the crossbar: 110 - 1685 mm
Crossbar feed: 1,450 mm/min.
VF 120 vertical headstock
Clamping taper : ISO 50
Headstock motor power: 18 kW
Spindle motor speed range: 28 – 910 rpm.
VF 160 horizontal headstock
Clamping taper : ISO 60
Headstock power: 30 kW
Speed range: 15 – 710 rpm.
Dimensions of the machine: (L x W x H) : 14,780 mm x 5,650 mm x 4,800 mm
Portla milling machine FRDP 16x30
Portal milling machine TOS FREV 12x40 A
y.o.c. : 1980
Clamping table
Table width: 1 250 mm
Table length : 4 000 mm
Max. workpiece height : 1 250 mm
Working feed of the table : 10 – 3 000 mm/min.
Rapid feed: 9 m/min.
Passage between columns : 2 000 mm
Height adjustment of the crossbar: 110 - 1685 mm
Max. workpiece weight: 3 000 kg/m
VFS 120 headstock
Engine power : 22kw
Max. torque: 3 000Nm
Spindle motor speed (stepless): 12 - 1 800 rpm.
Spindle taper: ISO 50
Slider travel : 500mm
Working feed of the slide (continuously): 5 - 1 000 mm/min.
Slide speed: 1 000 mm/min.
Portal milling machine FREV 12x40A
